waitingmygc
10-23 08:46 PM
One correction in wandmaker above response, if it helps
B.Sc (3 years) + MCA (3years) = US Masters or Even M.E
B.Sc (3 years) + MCA (3years) = US Masters or Even M.E
wallpaper February 2009 4x4 Ford Bronco
vinnysuru
03-30 12:26 AM
You can't come back on expired visa if you applied for a new visa in Canada if the request for new visa is denied. To come back on expired visa you will be using automatic visa revalidation and according to 2002 AVR memo, AVR applies only for Canada or Mexico if you visit for less than 30 days, haven't applied for a new visa stamp at a consulate abroad and are still eligible to be admitted in the status.
If you apply for visa and get denied, you can go back to home country and reapply or enter on AP if you have it. And entry on AP is not an admittance to US, it is only being paroled into US.
If you apply for visa and get denied, you can go back to home country and reapply or enter on AP if you have it. And entry on AP is not an admittance to US, it is only being paroled into US.
ivar
06-18 10:59 PM
Hi,
I came to US in 2004, my H1 visa was sponsored by cognizant technology solutions. H1 was valid from Nov 04 to Dec 06. later on my I 94 was extended from Dec 06 to July 09 .
I changed company and joined wipro in Aug 08 and now my I 94 is now valid till July 2010.
I have never gone back to India for a visit ever since I landed in US (2004)..I now want to go to India for few months and have read that i'll have to get my visa stamped before reentering US...
My question is if i'll have any problems with visa stamping because I was originally working with cognizant and am now working with wipro?..Am I out of status since my original visa expired in 2006 ?...pls help
You have maintained legal status proved by our I94 extensions.. also take all your paystubs for visa stamping to show your job contiunity. You will be good.
I came to US in 2004, my H1 visa was sponsored by cognizant technology solutions. H1 was valid from Nov 04 to Dec 06. later on my I 94 was extended from Dec 06 to July 09 .
I changed company and joined wipro in Aug 08 and now my I 94 is now valid till July 2010.
I have never gone back to India for a visit ever since I landed in US (2004)..I now want to go to India for few months and have read that i'll have to get my visa stamped before reentering US...
My question is if i'll have any problems with visa stamping because I was originally working with cognizant and am now working with wipro?..Am I out of status since my original visa expired in 2006 ?...pls help
You have maintained legal status proved by our I94 extensions.. also take all your paystubs for visa stamping to show your job contiunity. You will be good.
2011 2001 Ford Explorer Sport Trac
pointlesswait
09-17 11:49 AM
if you can find such a company...nothing like it!
but how many have such flexible policies..;-)
pointlesswait,
I respectfully disagree with your comment on no full time MBA on H-1. I infact know this first hand as one of my friends finished his full time MBA on H-1. His company was nice enough to keep him on the payroll but gave him 2 yrs of leave of absence. He is now back working for the same company. The only down side to his approach was that he ended up losing 2 yrs of his H-1 but his goal was to come back and work for the same company, so he didn't care.
but how many have such flexible policies..;-)
pointlesswait,
I respectfully disagree with your comment on no full time MBA on H-1. I infact know this first hand as one of my friends finished his full time MBA on H-1. His company was nice enough to keep him on the payroll but gave him 2 yrs of leave of absence. He is now back working for the same company. The only down side to his approach was that he ended up losing 2 yrs of his H-1 but his goal was to come back and work for the same company, so he didn't care.
more...
LondonTown
02-04 08:07 AM
Applicants for visitor visas should generally apply the U.S. Embassy or Consulate with jurisdiction over their place of permanent residence. Although visa applicants may apply at any U.S. consular office abroad, it may be more difficult to qualify for the visa outside the country of permanent residence. Visa applications are now subject to a greater degree of review than in the past so it is important to apply for your visa well in advance of your travel departure date.
As part of the visa application process, an interview at the embassy consular section is required for visa applicants from age 14 through 79, with few exceptions. Persons age 13 and younger, and age 80 and older, generally do not require an interview, unless requested by embassy or consulate. Making your appointment for an interview is the first step in the visa application process. The waiting time for an interview appointment for applicants can vary, so early visa application is strongly encouraged. Visa wait times for interview appointments and visa processing time information for each U.S. Embassy or Consulate worldwide is available on our website at Visa Wait Times, and on most embassy websites. Learn how to schedule an appointment for an interview, pay the application processing fee, review embassy specific instructions, and much more by visiting the U.S. Embassy or Consulate website where you will apply.
During the visa application process, usually at the interview, an ink-free, digital fingerprint scan will be quickly taken. Some visa applications require further administrative processing, which takes additional time after the visa applicant�s interview by a Consular Officer.
Read more here (http://travel.state.gov/visa/temp/types/types_1262.html).
As part of the visa application process, an interview at the embassy consular section is required for visa applicants from age 14 through 79, with few exceptions. Persons age 13 and younger, and age 80 and older, generally do not require an interview, unless requested by embassy or consulate. Making your appointment for an interview is the first step in the visa application process. The waiting time for an interview appointment for applicants can vary, so early visa application is strongly encouraged. Visa wait times for interview appointments and visa processing time information for each U.S. Embassy or Consulate worldwide is available on our website at Visa Wait Times, and on most embassy websites. Learn how to schedule an appointment for an interview, pay the application processing fee, review embassy specific instructions, and much more by visiting the U.S. Embassy or Consulate website where you will apply.
During the visa application process, usually at the interview, an ink-free, digital fingerprint scan will be quickly taken. Some visa applications require further administrative processing, which takes additional time after the visa applicant�s interview by a Consular Officer.
Read more here (http://travel.state.gov/visa/temp/types/types_1262.html).
Sachin_Stock
08-13 02:01 PM
So what are you complaining about :)
Remember, its for you future employment, and in all good faith, you MUST join the company where you now have Eb2.
Remember, its for you future employment, and in all good faith, you MUST join the company where you now have Eb2.
more...
centrum
09-25 07:19 PM
Passport is a just a travel document to enter. Once entered legally, passport has no importance for immigration (GC) purpose. There is no need to renew the passport, unless you plan to travel. In fact, you dont need a passport to enter USA, if you have Green card. The important thing is that you have to always maintain legal status in US. If you are in non-immigrant status, you have to watch for I-94 expiry, and renew them on time. Not the passport. If you are apply for GC, USCIS want to confirm that you entered the US legally with valid visa and maintained your legal status in US. They dont care about the expiry of ypur passport.
Thank you so much for your reply. What you said was exactly what I wanted to hear. You said passport has no importance for immigration (GC) purpose. How about for H-1B extension? I do not plan to travel until I obtain the GC. Where can I find I-94 expiration date and does I-94 have to be renewed with a valid (not expired) passport? TIA.
Thank you so much for your reply. What you said was exactly what I wanted to hear. You said passport has no importance for immigration (GC) purpose. How about for H-1B extension? I do not plan to travel until I obtain the GC. Where can I find I-94 expiration date and does I-94 have to be renewed with a valid (not expired) passport? TIA.
2010 74 FORD 4X4.
sunty
08-27 02:55 PM
2 year EAD here as well..I-140 has been pending for more than a year now..
more...
mpadapa
01-21 12:57 PM
Caliber, sorry to miss U'r presence. Hope you R actively working on the letter campaign
Due to some unforeseen situation, I will not be able to attend. I participated in the poll that i will attend. But now I will not be able to attend. Sorry about it.
Due to some unforeseen situation, I will not be able to attend. I participated in the poll that i will attend. But now I will not be able to attend. Sorry about it.
hair 1993 Ford Explorer 4X4 Xl
humdesi
11-07 12:23 AM
No need to register PIO kid till 15 years of age.
Where did you see this rule? Not mentioned anywhere here:
http://www.indianembassy.org/policy/PIO/Introduction_PIO.html
Where did you see this rule? Not mentioned anywhere here:
http://www.indianembassy.org/policy/PIO/Introduction_PIO.html
more...
vedicman
01-03 09:20 AM
NEW DELHI: India may drag the United States to the World Trade Organization , or WTO, over its decision to raise professional visa fees for an extended period and impose a 2% import levy on goods and services sold to the US government, a senior official has said.
The commerce department is studying details of the James Zadroga 9/11 Health and Compensation Act of 2010 which aims to increase visa fee and import taxes on supplies to government to set up a $4.3 billion fund for sharing the healthcare burden of those affected by 9/11 terror attack in New York.
The Senate passed the bill last week and India will soon take a decision on approaching the WTO, commerce secretary Rahul Khullar told ET on Monday.
The final bill, which is now with US President Barak Obama to be signed into law, spells more trouble for Indian industry than the one initially proposed as it imposes an additional levy of 2% on all goods and services sold by Indian companies to the US government and extends the period for higher visa fees from 2014 to 2021.
India has been trying for months to persuade its third largest trade partner to revoke the proposal to increase H1B and L1 visa fees as it could raise the cost of Indian IT companies operating in the US by $200 million annually.
"We do not rush into disputes, but beyond a point, patience does run out," Dr Khullar said, adding that it may be time for the country to explore the option of settling the issue at the WTO.
The first step would be to seek consultations with the US at the WTO on the contents of the bill and if the matter doesn't get resolved, a dispute settlement panel could be set up, the secretary said.
The 2% tax will be levied on countries that are not signatories to the government procurement agreement (GPA) of the WTO, including India.
The commerce department is studying details of the James Zadroga 9/11 Health and Compensation Act of 2010 which aims to increase visa fee and import taxes on supplies to government to set up a $4.3 billion fund for sharing the healthcare burden of those affected by 9/11 terror attack in New York.
The Senate passed the bill last week and India will soon take a decision on approaching the WTO, commerce secretary Rahul Khullar told ET on Monday.
The final bill, which is now with US President Barak Obama to be signed into law, spells more trouble for Indian industry than the one initially proposed as it imposes an additional levy of 2% on all goods and services sold by Indian companies to the US government and extends the period for higher visa fees from 2014 to 2021.
India has been trying for months to persuade its third largest trade partner to revoke the proposal to increase H1B and L1 visa fees as it could raise the cost of Indian IT companies operating in the US by $200 million annually.
"We do not rush into disputes, but beyond a point, patience does run out," Dr Khullar said, adding that it may be time for the country to explore the option of settling the issue at the WTO.
The first step would be to seek consultations with the US at the WTO on the contents of the bill and if the matter doesn't get resolved, a dispute settlement panel could be set up, the secretary said.
The 2% tax will be levied on countries that are not signatories to the government procurement agreement (GPA) of the WTO, including India.
hot 1984 Ford F250 4x4 460
va_labor2002
09-25 03:12 PM
I see no harm in contacting him; but your excitement about Chandrasekharan seems curious to me. When people who have themselves immigrated from India (who now have GC/citizenship) are so indifferent about us, how can you expect a second generation indian journalist to "understand" our problems ? He does not seem to have done any articles on immigration; so there is no objective way for us to say whether he is really sympathetic to us or not.
Remember that even anti-immigration organizations like numbersUSA have lots of members who are immigrants themselves or have immigrant parents.
I totally agree with you. But there is no harm in trying with him.He may be or may not be sympathetic to us.We don't know that ! He sees to be a smart journalist. If he is nice and sympathetic to legal immigrants,you may see a front page article about legal immigrants in Washington Post. Hope for the Best !
Remember that even anti-immigration organizations like numbersUSA have lots of members who are immigrants themselves or have immigrant parents.
I totally agree with you. But there is no harm in trying with him.He may be or may not be sympathetic to us.We don't know that ! He sees to be a smart journalist. If he is nice and sympathetic to legal immigrants,you may see a front page article about legal immigrants in Washington Post. Hope for the Best !
more...
house C/C 4X4. FORD RANGER 3.0TD
hemanth22
06-20 04:43 PM
Gurus
Please advice on the usage of A number
I came here as student and OPT before, the OPT had a A number
In my approved I-140 i had a A number, both the numbers are different
While filing the forms for 485/EAD/AP and I-693 ( medical report ) i saw a field for A number
Which number must i put in the field
Regards
Please advice on the usage of A number
I came here as student and OPT before, the OPT had a A number
In my approved I-140 i had a A number, both the numbers are different
While filing the forms for 485/EAD/AP and I-693 ( medical report ) i saw a field for A number
Which number must i put in the field
Regards
tattoo Ford Ranger 4x4
sduddukuri
02-09 08:24 AM
Not sure, employer is not sharing the "reason for denial" letter. Since me and my wife went to india and got visa stamped, i didnot force them.
more...
pictures Annonce 4x4 Ford 07 Explorer
Administrator2
04-29 09:38 AM
There are 26 pages in this document and half page for legal EB immigrants.
Pros
1.GC for MS in STEM
2.Per country limits removed
Cons
1.No increase in number of EBs
2.Now all counties will be backloged instead of just I and C. ( Misery loves company)
We disagree with your assertion that all countries will be backlogged. IV has advocated for removal of per-country limits measure for a very long time because we believe that removal of per country limits is essential for fixing the existing backlog and preventing future backlogs
We have publically listed removal of per country limits as our key objective. While we welcome the participation of everyone, if you disagree with us, you are welcome to use other resources available to you.
Pros
1.GC for MS in STEM
2.Per country limits removed
Cons
1.No increase in number of EBs
2.Now all counties will be backloged instead of just I and C. ( Misery loves company)
We disagree with your assertion that all countries will be backlogged. IV has advocated for removal of per-country limits measure for a very long time because we believe that removal of per country limits is essential for fixing the existing backlog and preventing future backlogs
We have publically listed removal of per country limits as our key objective. While we welcome the participation of everyone, if you disagree with us, you are welcome to use other resources available to you.
dresses Ford : F-250 Diesel 4x4 2006
immigration
03-12 09:22 AM
MN. You can call and tell them that you are using ITIN and will update with SSN when you have one.
more...
makeup 1988 Ford Bronco Fullsize 4X4
DDD
11-07 12:03 PM
Sorry Man I never posted a reply to the substituting for gradients. But your latter image was much better with image swap (instead of gradient). Doing your navigation in flash would be an excellent idea (instead of mapped images). I am thinking of writing a tut on how to make better gradients without using gradients....you think peeps would be interested? This technique has produced astounding results for me....I am trying to work on the grunge thing I jsu cannot produce anything cool....by the way me2 is very cool.
girlfriend 2008 Ford F-450 Lariat SD 4x4
acruix
07-13 04:05 PM
http://www.immigrantslist.org/page/petition/Chertoff
hairstyles March 2009 4x4 Readers Trucks
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
fall1998
05-12 04:19 PM
Those users who are pending are not PWMB and they had applied earlier, is that right?i
azharuddinm
07-23 11:46 AM
i did not inculde the P.O Box is this an issue ?
I used the below add for FEDEX.
Nebraska Service Center
850 "S" Street,
Lincoln, NE 68508
I used the below add for FEDEX.
Nebraska Service Center
850 "S" Street,
Lincoln, NE 68508
ไม่มีความคิดเห็น:
แสดงความคิดเห็น